DJI Mavic Mini / Pro / Air / Spark Range Booster

Range extender for DJI Mavic drones. Designed for the Mavic Mini controller but I believe most DJI drones have the same antenna design so it should work on most. I used reflective foil tape as a backing. The antenna grip must be printed using flexible filament / TPU. It should fit snuggly into the hole on the extender as shown in the picture.

Let me know the results if you try this out! I did two different test flights with them. On one I was able to get 1,000ft farther than without the boosters and on the other I got 400ft farther. Results will definitely vary depending on conditions but they do seem to work.