Door Coat Hook / Hanger

If you liked, don't forget to drop a like!

Description:

This door coat hook fits a standard 1 3/8 in or 35 mm door. Print one top piece and as many extensions as your heart desires! Holds multiple coats even if they are heavy coats. This was a pretty simple design, feel free to drop change suggestions.

My print settings: (For top piece + 1 extension)

printing time - normal mode 4 h 11 m

Printer: COREONE 

Filament: PLA

Filament used: 47.43 g / 15.65 m / 37.65 cm³

Bed temperature: 60 °C 

Nozzle temperature: 220 °C 

Nozzle diameter: 0.4 mm

Layer height: 0.2 mm 

Infill density: 15% 

Support material: no