Modelli 3D GadgetAltri gadget

Home Assistant ZBT-2 Wall Mounted Holder

0 recensioni
Wall mounted Home Assistant ZBT-2 mount with a notch cut out on the back for behind-wall routed wiring.
0
27
0
294
aggiornato 25 gennaio 2026

Descrizione

PDF

Printed in Overture Matte Purple PLA:

  • 0.16mm High print setting

  • 0.4 nozzle

  • Supports everywhere

  • 15% infill

  • Gyroid infill pattern

Printed on a Qidi Q2 with ~1h12m print time utilizing 33.35g filament (11.18m). 

Differences from the original: Notches on forward and side facing walls filled in, hole cut out in the back for USB-C cable. This is ideal for applications where the wiring is routed behind the wall for a flush mount.

Tags

homeassistantzbt2

Origine modello

L'autore ha remixato questo modello.

Home Assistant ZBT-2 wallmount
 da Max Aalderink
 

Differenze del remix rispetto all'originale

Notches on forward and side facing walls filled in, hole cut out in the back for USB-C cable. This is ideal for applications where the wiring is routed behind the wall.

Licenza