FDM PiP Trains Replacement Hooks

If your little one (or you) have gotten a little to rough with your FDM Train cars and broken off the hook, now you can repair it instead of printing a whole new car.

Print one hook and one pin for each repair.

Good bed adhesion is required, especially for the pins, so a clean build plate, or a little adhesion helper is recommended.

Sample shown printed in PolyMaker Black PLA at 0.2mm layer height and 15% gyroid infill with 2 walls and 5 top and 3 bottom layers. 

Presliced MK4 files are provided

Prusa Slicer and Bambu Studio projects provided.