Veneer repair corner clamp

The top and edge veneer of a cabinet door needed glueing, so I made a specialized clamp to clamp the two edges down while the glue dried.

The corner clamp is customizable for the thickness of the door.

To complete the clamp:

5 M3 nuts

5 M3 bolts

Post-Printing

How to use

After printing, put M3 nuts in the 5 sockets of the clamp, and thread through M3 bolts to do the work.

I lined the interior faces with cardboard held in place with tape, just to cushion the bolt ends to not mar the wood. Category: Tools