Safety Whistle with Handsfree Lapel/Collar Clip

Description

This is a remix of @BakedBean3D “Compact Dual-Chamber Whistle V2”. I saw a request from some whistle-blowers that they needed a whistle that was accessible if their hands were occupied. I think different clothing options might benefit for a different orientation, so I provided a model of the clip in both directions. Please print both to figure out what works best for you.

The original was designed to be loud and print fast. The clips add a bit of time to the print, but it's still an efficient print.

The print profile included has these custom features:

* Quality: Bridge Flow 1.01 (provides better bridging over the sound chamber)
* Quality: Thick Bridges (adds another bridging layer)
* Strength: Wall Loops 3
* Sparse infill density: 30%
* Bridge Direction: 90 (this is key, please check your slicer and make sure the first bridge layer is perpendicular to the sound chamber as shown in the photo above – you might have to adjust this depending on orientation/slicer)

This is my first remix. These print fast for me and are very loud. If you have questions or problems, I'll do my best. But, I'm just a newbie.

Stay safe everyone!

Added a clip to attach to a piece of clothing.