MeshTastic / MeshCore solar repeater box

Simple hexagonal box for MeshTastic / MeshCore repeater. Suitable for hanging, e.g. on a tree.

Suitable for use with six solar panels 110 x 60 mm (6V 200 mA) - glue e.g. with silicone sealant. For connection it is necessary to use 6 M3 hot melt nuts and six M3 screws. Inside the lower part there is a grid of holes (10 x 10 mm) for mounting internal accessories (depending on the internal device used).

repeater_box (upper part) no requires supports.
repeater_down (bottom part) requires supports and printing flat side down.