MayAudio Knight (DIY Hifi Headphone)

Hifi Closed-back Headphone using 50mm drivers.
The sound is v-shaped, sharp, detailed and deep. Isolation is very good.

Made to work with any headband, headphone diameter is 86mm.

Parts:
- Headband: https://www.aliexpress.com/item/1005007635621035.html For a 3d printable headband, print this one: https://www.printables.com/model/1108653-capra-headband-v3 But with the Satyr 2 (New 3.5mm (more screws)) yokes from this one: https://www.printables.com/model/908999-satyr-2-diy-hifi-headphones/files
- Driver (buy two): https://www.digikey.com/en/products/detail/ole-wolff-electronics-inc/OWR-5088TA-32/16343863
- Earpads: https://www.amazon.com/SOULWIT-Cooling-Replacement-Cushions-High-Density/dp/B0DJ2PB9TV
- Heat inserts: https://www.aliexpress.com/item/1005007973137842.html / https://www.amazon.com/Yaocom-Inserts-Threaded-Printing-Components/dp/B0DG59PW2R
- Micropore tape: https://www.amazon.com/dp/B000O62TK4
- Sockets: https://www.amazon.com/dp/B0833WYLWQ
- Dekoni attenuation foam kit: https://www.amazon.com/dp/B094YVX484
- Internal wires: https://www.amazon.com/BNTECHGO-Flexible-Conductor-Resistant-Extension/dp/B077XBWX8V
- Screws: any M3 screws https://www.amazon.com/Machine-Screws-Countersunk-Phillips-Assortment/dp/B0CCPH974T / https://www.aliexpress.com/item/1005009185417112.html
- Cable: any 2x 3.5mm cable, recommended: https://www.aliexpress.com/item/1005004033677985.html
- PLA filament: use any decent quality PLA, recommended: https://www.amazon.com/Polymaker-Filament-1-75mm-Rigidity-Cardboard/dp/B099KS2PDW

Assembly instructions: https://github.com/Maja5Dev/MayAudio-Knight/blob/main/Assembly%20instructions.md

Designed in Finland.
Join our discord server: https://discord.gg/FM5Sw2YNhX
Support us on kofi: https://ko-fi.com/maya224696