Creality K2 Combo (not plus) Waste Shoot

K2 Combo Waste shoot uses 6x2 mm magnets hot glued to secure it to the side of the printer box only needed as my table that its on isn't long enough for it printed in PLA printed on a K2 combo

Has a optional door for the collection bin makes it easier to get the waste out

NOT FOR PLUS MODEL 

How to assemble:

Step 1: Put small amount of hot glue in the magnet hole.  

Step 2: Press magnet into hole.

Step 3: Wait for it to dry

Step 4: Position  clip over waste shoot on the back of printer

Step 5: Attach in main shoot 

Step 6: Position bin bellow shoot (there is supposed to be a gap between them to allow it to loose speed

Printed on these settings:

Printer: Creality K2 Combo

Material: PLA

Supports: Tree from baseplate

Hot end: 210C

Build plate: 60C

Infill: 20%