Stackable rugged box for debug probe

Print the lid with support for the name plate, then remove the support.

Recommendation to print the name plate is using a 0.25 mm nozzle. For multi-color parts you can change the filament during the layer print.

You need 6x M3 30 mm screws for the hing and latches.

Additional details and links in https://mcuoneclipse.com/2026/01/22/3d-printed-rugged-enclosure-for-mcu-link-pro/

• added stacking feature
• optimized parameters for smaller boxes
• name plate on lid
• rounded corners