Simsonn (+other Heusinkveld clones) Pedal Elastomer Set

I was not happy with the softest set of elastomers that came with my Simsonn Plus X pedal set, so I designed a softer set for use with socks. I printed them in Creality CR-TPU (95A shore hardness) with 20% gyroid infill. Adjust the infill percentage if you want to go firmer or softer. Three elastomers 19mm, 28mm and 37 mm long. Will work with any Simsonn pedal set and any other Heusinkveld clone that uses elastomers with an internal diameter of 10.5 mm. Check the length of the elastomers that came with your pedal set to see which ones you need. Don't know how well these will work on original Heusinkvelds since those supposedly use elastomers with a smaller internal diameter and may wobble in place.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

Supports:

Resolution:

Infill:

Notes: