Amber's SKZ Stray Kids Light Stick Stand
A stand for Stray Kids Light Stick (the title sort of gives it away) that was made for Amber.
2
9
0
68
updated
January 22, 2026
Description
PDFMade with PLA
Layer Height = 0.3 or 0.4 mm
Perimeters = 2
Infill = 15% Gyroid
Supports: Used paint-on organic supports for the bottom vertical and horizontal star points
Recommended using paint-on seams so seams follow edge of star & corner of uprights.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
- Made the base wider and deeper to address stability problems (especially when batteries were installed in the wand).
- Made the uprights wider and follow the curvature of the base.
- Add star emblems to uprights.