Sonic Pad & BTT PAD7 Hinged Mount for CRAFIT Enclosures

Remixed the fantastic Hinged Mount for Sonic Pads and BTT PAD7's for Ender 5 vS1's to fit the side of CRAFIT Enclosures too! The top, front side screws on the enclosure are plenty long enough to also hold the Sonice Pad or BTT PAD7. Works great!

Only the Hinged Mount part has been modified so this will work with both the Sonic Pad and BTT PAD7 Ender 5 mounts. Simply grab the correct mount and pins from the original model that you need - no Ender 5 required! ;)   

And this will also mount to anything with similarly sized screws spaced 1.25-inches apart, center-on-center. And if you need to mount it on the other side simply mirror it in your slicer.

Huge thanks to 

E. Soderberg  scooter_magavin Alexander Malerbakken

for the original models!

Narrowed the distance between the screw holes on the hinge mount, and enlarged them to fit the top, front side screws on the CRAFIT enclosure. This will also fit anything with similarly sized screws spaced 1.25-inches apart, center-on-center.