Drawer Divider Bins (vase-mode) for Harbor Freight Storehouse 40 Bin Organizer

A set of vase-mode drawer divider bins for the Harbor Freight Storehouse 40 Bin Organizer.

You can use just the middle section, or use all three sections. Personally I use all three because I keep a lot of small parts, and I want to be able to move things around, take parts with me without the whole drawer, etc.

When printed in color, that color will be visible even when the drawer is closed. Make your favorite color pattern or color code the bins to suit your needs.

These inserts are to be printed in vase mode. They print in under 20 minutes each at 35mm/sec or much faster if your printer setup will handle it. PETG is recommended but any filament should work. They have a bit of slop to accommodate the manufacturing variability in Harbor Freight tools that we all know and love, but are generally very precise.

You can align them for a sequential vase-mode print of all three at once.

Remember these are vase-mode so they are not meant to survive abuse. Keep elephant's foot compensation to .1 or less to help the sides bond to the base.