Masterful Dungeons Secret Wall Door

Masterful Dungeons Secret Door is designed as part of the Masterful Dungeons modular dungeon system.

This model is disguised as a regular wall segment, allowing it to blend seamlessly into dungeon layouts. The wall can be opened on a hinge, revealing a hidden passage during play.

The hinge needs to be glued onto the bottom piece. First print the pin, then glue it together by folding it along its hinge. Lastly, glue the pin into the recess in the bottom piece.

The secret door is designed to look and feel as sturdy as a regular wall piece, so only the DM will know which wall is the secret door.

Instructions for the tiles can be downloaded HERE

Key features

• Compatible with the Masterful Dungeons tile system

• Disguised as a standard wall piece

• Hinged design reveals a hidden passage

• Designed for repeated use

Filament

I test out a lot of different filaments for each of my specific builds, to make sure that the strength and print quality is as good as they can be. My filament recommendations can be found on my website HERE.
(NOTE: The links on my site are affiliate links)

Magnets

The tiles and this tool were designed to use 5x2mm magnets.
I buy them on Amazon as this is where I've been able to buy the most at the same time and at the best price: 
Affiliate link
Non-Affiliate link

Printing notes

• Designed for standard 0.2mm layer height

• No supports required

• Scale is matched to the the standard 1 inch TTRPG grid system

Help me expand the collection

You support is directly tied with how much I can work on these tiles.
If you like what I do, please consider donating to me on Patreon or subscribing to my campaign Secrets of Ke'Landor which is a fully curated campaign, centered directly around these tiles.

Even just subscribing to my TikTok or YouTube channel or visiting my website can be a big help.