Snapmaker U1 Toolbox for my Top Cover Adapter

This is a toolbox for the Snapmaker U1. It is made for random tools and stuff you need close to your printer. There are different size that you can choose from. Watching from the front of the printer the depth of the of the boxes are 50mm, 75mm or 100mm and the widths are 40mm, 50mm or 60mm. The boxes with a depth of 50mm can be used on both sides and for the others I made always one for the left and one for the right.  The boxes don't interfere with the spool holders. In the pictures you can see a 100mm x 50mm box for the left. The toolboxes attach to my top cover adapter which has attachement points on both sides.

UPDATE: There are some now models to choose from. You can get the 100mm boxes now with two compartments. I added deviders at 33%, 50% or 66%.
Thanks to SCOTTISH ian !

The adapter can be found here: 

Printing:
Support is needed.

Assembly:
You have to remove an accessory cover from the top cover adapter as shown in the pictures. There are two holes for wood screws to pull them out. When the cover is removed just connect the toolbox and place the adapter back on the printer.

Please upload your make - I would love to see you prints!

Click HERE if you want to buy me a beer.