Beatles - All You Need Is Love - Hueforge

This whimsical piece features the iconic phrase “All You Need Is Love” surrounded by bright rainbows, flowers, strawberries, clouds, and musical details, evoking the optimism and charm of 1960s pop art. With bold colors, nostalgic textures, and a joyful composition, it’s a warm, feel-good design perfect for music lovers, gift-giving, or adding a splash of happiness to any space.

Project: Beatles - All You Need is Love.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 3.52mm and the Actual Thickness is 3.52mm

#1c1c1c PLA PolyTerra Charcoal Black Transmission Distance: 0.3
#062b4d PLA PolyTerra Army Blue Transmission Distance: 0.3
#065b4a PLA Prusament Opal Green Transmission Distance: 4
#519f61 PLA PolyTerra Forest Green Transmission Distance: 0.5
#5aabb1 PLA PolyTerra Arctic Teal Transmission Distance: 0.5
#39b9db PLA PolyLite Aqua Blue Transmission Distance: 2.5
#f5547c PLA BambuLab Basic Hot Pink Transmission Distance: 3.9
#e72f1d PLA PolyLite Red Transmission Distance: 1.5
#f78e0e PLA PolyTerra Sunrise Orange Transmission Distance: 2
#f0be02 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
#ffe17f PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
#e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8
#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 13 unique filaments

Swap Instructions:
Start with Charcoal Black
At layer #8 (0.72mm) swap to Army Blue
At layer #12 (1.04mm) swap to Opal Green
At layer #14 (1.2mm) swap to Forest Green
At layer #18 (1.52mm) swap to Arctic Teal
At layer #20 (1.68mm) swap to Aqua Blue
At layer #22 (1.84mm) swap to Hot Pink
At layer #25 (2.08mm) swap to Red
At layer #27 (2.24mm) swap to Sunrise Orange
At layer #30 (2.48mm) swap to Savannah Yellow
At layer #34 (2.8mm) swap to Lemon Yellow
At layer #36 (2.96mm) swap to Beige
At layer #39 (3.2mm) swap to Ivory White for the rest.

Feel free to use whatever colors you have on hand. The brands of filament are a suggestion, experiment with what you have - I know it will turn out great!

Please note, a height modifier was applied to ensure a thicker base - this results in the layer numbers being offset by 3 layers, however the heights remain consistent.

One AMS? No problem! There is a pause included before the 4th color is completed - one method to utilize one AMS with 4 slots is to assign the additional colors to previously used slots when sending your print. Here is an example of my preferred method and strategy:

Arrange the filaments in the AMS in order according to the print.   Assign the 5th and subsequent colors to the AMS numerically.   At the pause, replace the color in slot #1 with the 5th color, resume printing.   If you have more than one AMS or are manually changing filaments,  ensure you have removed or adjusted the pauses before printing.

Want to support my work or sell your physical prints of this model? A link to my Patreon is available through my profile.

This model was created by Manic 3D Prints using Hueforge, based on a concept and idea fully developed by us. The source image was generated with the help of online tools to bring our vision to life. The 3D model itself was entirely designed and rendered by us using Hueforge as part of our original creative process.