vitus DHF 112 front hub left(brake) side end cap (KTi QL-TW1F)

i upload all formats, stl, 3mf and step. it fits vitus DHF112 front hub left(brake) side end cap. but techniquely, almost all modern mtb hubs follow the exact same dimensions:

110mm in total width to fit the forks, 15mm inner diameter to fit the standard through axel, and outer diameter of 21mm to fit the fork. the hub side will have a slight ring to press against the inner ring of the bearing. the flange size act as a simple dust cover, its diameter should just fit the outer diameter of the bearing. 

the only variable that might be different between different hubs is the height. i think.

PLA is super rigid, and the caps only receive xy compression force. I tested in some green/blue trial with roots, small jumps and drop, and works fine. This is probably a temporary solution while you wait for your metal replacement. i do not intent to test it for more chunky or dh trails. 

print a few to keep as spares. 

PLEASE PRINT IN AT LEAST 6 WALLS, 80%+ INFILL.