yet ANOTHER extrusionless MGN12H rail mod
The holes didnt line up for me so i made a remix. also replaced the inserts with pressfit lock nuts.
6
19
0
231
actualizado
17 de enero de 2026
Resumen
PDFThe holes didnt line up for me so i made a remix. also replaced the inserts with pressfit lock nuts.
Origen del modelo
El autor ha hecho un remix de este modelo.
Diferencias del remix respecto al original
I know theres already 3 other remixes for this but none of them worked for me. this one uses a regular unmodified 300mm MGN12H rail. I also modeled in slots for press fit lock nuts since heat inserts aren't really necessary for this.
Printed in ABS at 85% gyroid infill 0.2mm layer height. If you cant print ABS, use PLA instead. PLA is more rigid then PETG which would benefit this better.
(or you can use CF-PETG)
I remodeled this from the ground up so enjoy the step files.