FRC Box Tube Cutting Jig

A small jig for FIRST Robotics Competition #10 0.5" spacing patterned box tubing. Use a 2.5" length (image is 2.25", but 2.5" would allow to fully fit through a 2x2, instead of 1x2 and 1x1 with a shorter one) by 0.175" diameter dowel. You may have to use a deburring tool or drill to increase the hole size, but .STEP is included so feel free to adjust it. I recommend using a mallet to press fit it so it won't come out. Ours was printed with PLA+, 65% adaptive cubic infill, and 4 perimeters on a Bambu Labs P1S.