80mm Extractor Tube Lock

This is designed to securely grip an 80mm extractor hose onto a 70mm diameter tube. Effectively doing the job of a jubilee clip (though not adjustable)

Directions

1. Slot the TubeLock onto the hose (with the thicker grip facing away from the end of the hose)
2. Position the hose onto the target tube
3. Place the two Tube Grips around the hose on top of the tube (with the thicker part facing away from the end of the tube)
4. Slide the Tube Lock up and over the two Tube Grips to lock them in place
    

Required:

• 1x Tube Lock
• 2x Tube Grips

Whilst this is designed for 80mm tube locking onto a 70mm pipe, you should be able to scale them to fit whatever you like relative to that.