10mm to 5mm magnet adapter
If your magnets are too small to fit into a model, you can use this to get them to fit
0
4
0
11
updated
January 15, 2026
Description
PDFI'm a dumdum and bought the wrong size magnets for something I printed. The original model had a 10mm diameter cutout for a 3mm high magnet, and I bought 5mm diameter / 2mm height. This allowed me to inset 2 magnets in place of one with some super glue.
Uses less than a gram to print and printed in like a minute. The actual diameter of this model is 9.75mm so there is some clearance when inserting it into the 10mm cutout.
Tags
Model origin
The author marked this model as their own original creation.