Mini greenhouses

Hello,

Here is my entry for the PET bottle recycling contest. The idea came to me because we are in the spring and the planting begins. this object allows easy opening for watering and an adjustable ventilation. I adapted the model several times to reduce the most plastic, even if I wanted to use less.

This is suitable for a bottle diameter of about 85 mm. I didn't have another on hand. If you are interested, tell me the diameter you need and I could make another version.

You can print in PLA and PETG, i tested, both work fine.

Print the screw side on the bed, supports only needs to the rails for the bottom part.

For assembly I suggest you watch this short video.

Let's print !