Kulp K8 - B PSU Controller Mount

Simple to print, print face down.

This PSU Mount is designed to fit the standard hole dimensions for PSU (verified on Alitove and Meanwell).

The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only uses top screw holes on the PSU to allow the bottom to be used for PSU mounting.

Mounting Hardware:

2x - M4 - 8mm bolts (secure mount to PSU)

4x - M3 - 12mm bolts/nuts (secure controller to mount)

Print Settings

Notes:

Print Settings

Nozzle: .4mm (.6mm or larger will work too)

Layer Height: .32mm

Perimeters: 3

Solid Layers: 4 top/bottom

Infill: 10%

Speed: Standard, but slower is better for the support brackets