Self-Watering Planter

* Requires string or other wicking material

Print with at least 10-15% infill on the bottom of both files for good bridging. Does fantastic with my 0.6mm nozzle with 0.4mm layer height. Seam ‘nearest’ should get all of them in the corners.

Some plants will not like this environment as it will never dry out unless you don't refill it. Not the best for cacti and other related plants.

Just loop the wick through the holes and fill up the base, and your plant is good to go! Don't forget to check the reservoir every now and again (;

*Included G-Codes to quickly print 2 of them on a Prusa Mini

And Please, post a make!