XIAO Bus Servo Adapter Case

This is a from-scratch rebuild of the XIAO Bus Servo Adapter Case by Seeed Studio. I made this from scratch with measurements as I wanted to modify the Seeed Studio version, but the CAD files were not available.

The components this model houses can be used to drive various smart serial bus servos from Feetech (often rebranded as Waveshare and other branded servos).

Because I am not fond of self-tapping screws in plastic long term, this version requires:

• 4x M2 inserts

• 4x M2x8 screws

If you like this design please consider supporting me by joining my club here on Printables, even if only for a month. Thank you!