Horned Valkyrie Warrior (FDM)

This model represents a horned valkyrie warrior holding a double-bladed axe in a stable standing pose.

The geometry is optimized for FDM printers, focusing on printable angles and solid connections. Details are clean without being too fine, making the model suitable for standard nozzle sizes.

Supports are required, mainly for the axe and upper body. The model can be scaled without issues before slicing.

Recommended settings:

• Layer height: 0.2 mm

• Nozzle: 0.4 mm

• Supports: Yes

• Material: PLA / PLA+ / PETG

Designed as a display figure or painting project.