Keyhole Mounting bracket for Ikea Hektogram lamp

This is a modified bracket based on the IKEA RODET Switch mount for IKEA HEKTOGRAM by PXLCRFTR.

It has a matching keyhole to that of the Samsung Speakers, PS-KS1-1 Surround Sound Satellites, that allows one to mount them to the Ikea Hektogram lamp. (3.98mm width to fit the 4mm smaller hole and a 7.96mm stub).

Thanks to PXLCRFT, its a snug fit onto the lamp, but I've added a slot for a Zip tie to fit into to add additional pressure

It can be printed on its base but requires some support for the keyhole, and optionally for the zip tie cut outs, this orientation ensure loads are normal to print direction.

I used a Prusa Core One with 0.2mm layer heights on a 0.4mm nozzle, 4 perimeters, 10% infill, no brim, organic supports, White Prusa PLA. Step files are included should you want to modify it.

Modified by cutting in-half for easier printing and with a keyhole to adapt to the speaker. It also features a slot for the use of a zip tie for additional safety.