Prusa I3 MK3S LED light bar mount

A nice LED light bar mount for a Prusa I3 MK3S printer, should fit on previous printer versions (MK2, MK2.5, MK3).

It's based on previous work from "Gigante" user (https://www.thingiverse.com/thing:3316724), but his arm lenght was too short and the stepper of the head unit of my printer was knocking the LED light bar so I made this with a higher and longer arm for the LED light bar.

Also found other mounts:
https://www.thingiverse.com/thing:2205617
https://www.thingiverse.com/thing:2863523
https://www.thingiverse.com/thing:2949974
https://www.thingiverse.com/thing:1506126

UPDATE 04/19/2019: New design (v2) on the hook that attaches to the prusa vertical frame to avoid possible touches with the extruder when reaching the higher top.

UPDATE 04/26/2019: Updated design, the hook that attaches to the prusa frame was revised, now it has a slimmer profile on the front side, this to prevent even further the extruder to reach it.

UPDATE 07/262019: Another design, now with hooks to easy remove the led bar

Print instructions

Category: 3D Printer Accessories Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: Doesn't Matter

Supports: No

Resolution: 0.2mm

Infill: 20% gyroid

Filament: cheap generic ABS black
Notes:

Print two pieces

Use at least 4 wall paerimeters, 15% to 20% infill

Use zip ties (x2) to mount the LED light bar

How I Designed This

Used Autodesk Fusion 360