DJI Controller Mounting Adapter with quick slide detach
Fits DJI controller with or without glare shield. Dowel arms insert into the joystick storage cavities.
0
4
0
45
actualizado
16 de enero de 2026
Descripción
PDFFits DJI controller with or without glare shield. Dowel arms insert into the joystick storage cavities. Sockets for 1/4 20 nuts if desired. Edge surfaces to prints at 45 degrees. I used PETG at .20mm. If your glare shield covers the joystick storage cavities then cut square openings to suit. Sand the mating edges of the tapers to get the desired smoothness of locking.
Origen del modelo
El autor ha marcado este modelo como su creación original.