Venom Backpack Pendant / Keychain (No AMS needed)

Size & Scaling: This model is designed to be substantial, making it perfect as a backpack or bag pendant.

• Standard size: Optimized for a 0.4mm nozzle.

• Keychain size: If you prefer a smaller keychain, you can scale it down to 50%, but I recommend using a 0.2mm nozzle to preserve the small details.

Printing Instructions: The multicolor effect on the face is achieved by a simple filament swap at a specific layer.

1. Main Body: Start with Black. Add a pause or filament change in your slicer to swap to White for the eyes and teeth.

2. Tongue: Print separately in Red.

3. Recommended Setting: Enable Ironing in your slicer for the all top surfaces to achieve a smooth finish.

Assembly: The tongue is a separate part with a pin. To assemble:

1. Put a small drop of glue into the hole on the main body.

2. Insert the tongue's pin into the hole and hold it for a moment to set.

Versions: The files include both a version with the separate 3D tongue and a version without the tongue.