New: Segmented Vacuum Hose (Ball-Socket Joint)

Segmented dust collection hose compatible with various nozzles and connectors. 

All parts print without any supports, with 0.3 mm constant layer height.
The tolerance values between the ball and the socket part are kept tight. PLA works fine but PETG would be the better choice for a hose which gets frequently bent.

We have used PLA so far (Prusament rPLA Algae Pigment).
PETG usually requires a bigger tolerance setting. 

Let me know if you're interested in other dimensions. 
Don't hesitate to post your makes and comments.

The basic link's outer diameter is about 43 mm, its overall height about 40 mm.

The connectors come in different inner and outer diameters. Each one can be attached to a drill press column if needed (requires two cable ties or some wire).

Update 202602205:
Added a short Festool connecting link without bracket (ID 35mm).

All nozzles are available here:

:-)