Alinco DR-735 Control Head Mounting Bracket / with cup holder base
Description
PDFThis cup holder insert was designed to fit a 2016 Chevy Silverado cup holder. May fit other sizes / years etc. The bracket with the pivot was designed with a taper so it friction fits into the cup holder insert. This way the cup holder insert can be modified to fit other vehicles without reprinting the entire bracket assembly.
Material: PETG
No supports
I modeled the pivoting cup holder bracket to use with the head bracket modeled by https://www.thingiverse.com/FakirCZ/designs
Below is from the original creator of the head bracket.
"This is a control head remote mounting bracket for Alinco DR-735 ham radio transceiver. It is based on the original bracket mounted to the transceiver body without the holes for mic and control head connectors
The outer mounting holes match the original, the inner ones are 40x24 mm.
If the bracket is to be mounted inside a car, print with PETG or ABS as PLA won't withstand the temperatures.
Prints fine without supports.
Enjoy.
Print Settings
Material: PETG
No supports needed
Model origin
The user re-uploaded this model. The user is not the original author of the model.
