OMP M1 & M1 Evo V2 Tail Motor Case & Separate Fin

The Tail case is a similar design to the M1 EVO one and is compatible with the standard EVO carbon tail fin. The tail case can easily be slipped over the motor wires, without the need to remove them from the boom. The Tail Case is clamped using a M2 x 6mm socket screws and M2 nut. I used 2 x M1.4 x 3mm socket screws (EVO frame screws) to secure the fin.
My painted fin (100% infill) only weighs 0.2g more than the carbon one.