Macbook Pro Stand

Hi,

there are many laptop stands out there, this is my take on it. It is printable on a Prusa Mini (you will have to print all parts seperately). Can be printed with standard PLA, 0.4mm nozzle and 0.2 mm layer height and of course no support is needed.

I tested it for my 14' Macbook (2021) but I guess it works for most other notebooks as well. The distance between the two holders is 18 cm, so plenty of room for most trackpads. 

For a full stand you have to print

• 2x Stand
• 2x Axis

An then just click them together. For protection of the laptop, i recommend some cloth or similar into the hooks below, in order to protect the laptop from getting scatched.

Enjoy !