100 Card Deck Box

100 Card Deck Box with slots for 2 top loader sleeves and spacing for tokens.

Print was designed to not need supports. Orientation of the design for printing is having opening facing up. Print in pictures was made out of ABS because I sometimes leave my bag in the car. It will function rather well with PETG or PLA also. Assembly is pretty straight forward.

For those curious, the image on the sides was done in the slicer using an SVG file. It was debossed 1/16 of an inch. There is plenty of material on the sides (not back) of the lower half to add in artwork. Best artwork for this would be black and white image. Remove the black or white layer in the SVG then imported into the slicer then deboss into the design.