Slim, elegant, shiny. Easily printed in a few grams of TPU https://www.printables.com/model/1540194-mare-barefoot-shoes
January 3, 2026
Description
PDF
Orca Slicer / Bambu Studio settings:
Global:
- layer height: 0.2mm
- line width sparse infill: 0.6mm
- line width outer wall: 0.69mm
- walls: 0
- top shell layers: 0
- bottom shell layers: 0
- infill density: 33%
- infill pattern: Grid
- infill anchor: 1000 (unlimited)
- max infill anchor: 1000 (unlimited)
- infill direction: 45°
- detect narrow internal solid infill: no
- speed sparse infill: 18 mm/s
- reduce infill retraction: no
- enable support: yes, threshold angle 1°, on build plate only, 2 support enforcers: fort and middle
mare_1:
- walls: 1
- object flow ratio: 1.05
- infill density: 100%
- infill pattern: rectilinear
mare_2:
- line width sparse infill: 0.3mm
- object flow ratio: 2
Filament:
- Retraction: 1.8mm
- Wipe: no
- Z hop: 1.2mm, Normal type
- Max volumetric speed: 2.5 mm^3/s
- Temperature: 220°C - 230°C
website: https://www.riverfamily.art/
made with Stepan: https://drunks.st/
Tags
Model origin
The author marked this model as their own original creation.
License
Featured in Articles