Original One Blade razor case (magnetic)

Made a simple case with print in place hinge for Original One Blade razors,
not so much for protection as for keeping it in safe space.
Closing mechanism uses 4 embedded 6 x 2.5 mm magnets.

There is enough space to add an embedded text like a name etc.

• Layer height: 0.16 mm

• Pause at layer: 38 (if 0.16 LH is used)

• Material: PLA, PETG, any

• supports not needed (may vary by printer)

• printed on BambuLab A1, 0.4mm nozzle

Step file is included below if you want to change some parameters.