Switch 2 Mount for Pro Controller 1

The model was significantly revised and, after several iterations, has now been perfectly fitted. The angle of the Switch was slightly increased to ensure a more comfortable grip on the controller. By keeping the model consistently the same width, fewer support structures are now required and the mount has become more stable overall. Only around the controller was the model made partially thinner to provide more freedom for the joysticks and buttons. In addition, I added holes that allow the LEDs to remain visible. The openings for the USB-C ports on both the controller and the Switch were also optimized, as the previous model did not leave enough clearance.

In addition, the distance between the Switch and the controller was slightly increased to provide more freedom for the thumbs.

The mount was made significantly more stable. The controller LEDs are now visible, and the USB-C ports are easier to access. The mount now sits much more securely on the controller.