Size 000 capsule filler multi-tool

This is a multi-tool for my Size 000 Capsule Filler. It is used to scrape powder into the capsules, compress the powder, and lift them out of the filler. 

PRINTING INFO: Print 1x base and 10x pegs. Nine are fitted into the divots, and one is fitted through the hole to act as a handle. CA glue was used to secure the tenons in the mortises. 

See the capsule filler base for more information: https://www.prusaprinters.org/prints/147492-size-0-capsule-filler-base