Vase mode shelf and drawer .

Vase mode based shelves and drawers ( curas spiralize outer contour).

The drawers can be printed with any line width whereas the shelves would have to be printed with 0.8 or lower ( will fix it soon ).

I have printed the drawers with layer height of 0.26 and the shelves with 0.24mm .

time taken with the above parameters was 3 hrs for the shelves and 45 min for the drawers . and the filament used was 80 grams and 17 grams respectively (basic file) .

The drawres have 3 (editable) areas where you can slide thin sheet of printed plastic to divide the drawers .

The design can easily be changed in fusion 360 by installing the free / personal  version of fusion 360 and going to the modify drop down option and selecting change parameters(some changes break the files . so just be carefull and just check everything before printing ).

Please let me know if you face any problem with the design or have any suggestions .

Also it would be nice if you do any changes and can share the files so others can just download your files instead of wasting their own time in fixing / chaining the same parameters.