Voron 2.4 (350mm) skirt mesh with power outlet

I wanted a panel mount C13 port but with the mesh added. I did not find anything like this, so I made this one from the STL in the original upload. 

Step file was generated from the STL then I added the hexagon mesh. The print can be paused at the final layer of the mesh and swapping filament colors before swapping back to the main color.

Takes standard panel mount C13 port like found here:

https://www.amazon.com/dp/B0DZ23FCHH?ref=ppx_yo2ov_dt_b_fed_asin_title

Added hexagon mesh pattern