4mm Pry Tool / Spudger

This is a pry tool / spudger.

It is a generally useful tool, but I designed this to specifically open Velux KLI 110 Skylight remotes .. needed to change the batteries.  Press straight into a groove and it pops open.

Features:

• the tip is small at 4mm wide .. a tad under the grooves in the Velux remotes

• the tip is 0.4mm thick and tapers aggressively making it strong

• the tip has strong curve to it so opening a remote can be done in tight spaces

• prints on the side so this is strong and requires no supports

Included: STEP, Fusion 360 and 3MF files.

Printing tips:

• 3 wall loops

• Top surface pattern: concentric

• Wall generator: Arachne <-- this makes it strong