Toy Faucet and Sink

The faucet comes in 2 pieces:

• "Faucet-printinplace.3mf", the print-in-place body of the faucet with free spinning round handles and free spinning base for mounting the spout

• "Spout.3mf", the spout

such that everything prints without supports. The kid painted the red/blue but it could be achieved by offsetting one of the handles insets by, say, 2x the layer height and add color changes.

Tolerances were designed for my Prusa Mk3s+, a 0.6mm nozzle (but a 0.4 should work just as well because everything is at least 2x0.6mm, i.e. 3x0.4mm) and a 0.4 layer height.

If you need larger tolerances than 0.3mm gap for the print-in-place, please use the included STEP file to adjust.

The sink ("Sink.3mf") is completely separate and was designed for a reclaimed kid's kitchen (224x160mm hole, 17.5mm radius corners)