Cassette Tape USB Mixtape

This is a cassette tape style USB stick holder I designed. Perfect for giving your valentine a mixtape in the modern age.

It's designed for use with this range of Kingston USB sticks: https://ebay.to/3rxhbdn

You can see a video of it in use here: https://youtu.be/3gnp6Cvz4eg

If you like this model, you can tip me via 'Buy Me a Coffee' here: https://www.buymeacoffee.com/JoshForwood

Thank you!

Print Settings

Rafts:

No

Supports:

Yes

Resolution:

0.1

Infill:

30%

Post-Printing

Once printed, need to glue the two halves together, I recommend LocTite401. Once that has dried, you can slot the USB stick in the gap, with the washer ring inside the hole, then pop a dab of 401 on each end of the thumbsticks and insert them through the hole. Make sure to let it properly dry before trying to move it, and take a lot of care when fitting the thumb sticks not to drop any glue anywhere else as you could just glue the USB stick in place inside the cassette.