Multiboard Wii Remote + Nunchuck Holder Remix

I recently collected a complete Wii console with 4 remotes and nunchucks and I needed a good storage scheme for the remotes when not in use. I found @pngsequence_2074423's model for the Skadis pegboard and modified the design to fit into my multiboard. I just filled the Skadis holes and replaced them with multiboard's large bolt holes. I used two 13 mm Big Thread - Flat Head - Bolt to attach each holder to the board. I'm quite pleased with the design and my modifications. I printed each remote + nunchuck holder at 0.16mm line height with 15% infill in about 2 hours.

I modified the mounting scheme to use multiboard 13mm Big Thread bolts instead of the Skadis design.