Kobra S1 - ACE PRO Riser - taller version

The riser for the AcePro is designed to elevate the device, ensuring better airflow and preventing direct contact with the 3D Printer, Anycubic Kobra S1 Combo.

I built the side supports with the Skadis pattern, so that everyone can add what other accessories they want.

Very easy to print. Use also some glue for assembly.

You can use the same screws with which the Ace Pro was locked to the black stand to create a fixture between Ace Pro and the riser.

I also added 2 rear endstops for ACE Pro, to avoid to drop down in the backside of the Kobra S1 Combo 3d printer.

This riser is the taller version of the riser from the above link : https://www.makeronline.com/en/model/Kobra%20S1%20-%20ACE%20PRO%20Riser/159078.html

Enjoying the model?

If this design made your day a bit better or your print setup cooler, and if you’re feeling generous, you can buy me a coffee on Ko-fi!

Your support helps me keep creating and sharing more awesome stuff.

Support me here: https://ko-fi.com/adrian_m2025

Thanks a ton — and happy printing!