🧍‍♀️ Busty Female Body (Vase mode)

Info:

• I took original (posted here by @CorruptWave16) which has origin on thingiverse
• but I tried to make it more busty & booty

Print instructions:

• see 3mf files
• attaching more than one scale variations
• obviously bigger breasts are harder to print, because of overhang, but I have found settings that works for some of my filaments
  • also using variable layer height - basically the most problematic are breast overhang and shoulders, so attached 3mf files have 0.07mm layer height there
• recommendation: 
  • try the lower brest part for the beginning (by moving the model below the surface & use negative volume for the rest above breast) - to know if it will print safely
    • i uploaded also these 3mf files for this part test
• attention:
  • uploaded settings worked for my Prusament Vanillla White PLA
  • but it didnt go well for example with Prusament “Oh My Gold”
    • the lower breasts part was ugly
  • so choose filament, with which you have best Vase mode results with overhangs and try for the beginning test file for breast part
  • also shoulders may be problematic, you can test this part 1st too
• 50% scaled model is more easy to print