Maruzen - M1100 - SawnOff Style Grip - HPA Conversion - Airsoft - Free Download

A sawn off style grip for the Maruzen M1100, for use with HPA.

The models includes supports to make it easier to print. But you can also add you own supports.
Models are oriented for optimal printing.

You will need following bolts:
1x   M6x60mm Socket Head Bolt to mount the grip.
2x   M3x10mm Socket Head Bolt to mount the bottom plate.

Print Settings:

For the best mix of robustness and flexibility, I recommend you print it in PETG.

Layer height: 0.15mm
Perimeters: 5
Top Layers: 6
Bottom Layers: 5
Infill: Straight
Infill rate: 40% - 100%
No additional supports needed.

If you want, you can add "Fuzzy Skin" to the designated areas. Make it as corse and grippy as you like.