9mm Single Snap Cap Pocket Case & Maintenance Tool (Screw-Top)

This is a portable "maintenance kit" for your 9mm training gear. It is designed to house a single 9x19mm snap cap and all the small consumables needed to keep it in working order.

Features

• Secure Screw-Top: The threaded lid ensures the case stays closed and your small parts stay safe in your pocket.

• All-in-One Storage: Holds one snap cap plus a supply of spare O-rings and reversible printable primers.

• Custom Maintenance Tool: Includes a printable handle designed to hold a specific nail size to act as a primer punch.

LINK TO VIDEO

The Primer Remover Tool

To easily swap or flip your reversible primers, this kit includes a printable handle for a DIY punch tool.

Required Hardware:

• Nail Diameter: 2.2mm

• Nail Length: 45mm

Assembly:

1. Print the handle.

2. Insert the 2.2mm x 45mm nail into the handle.

3. If the fit is loose, use a small drop of superglue to secure the nail permanently.

4. Use the tip of the nail to push the primer out through the through-hole in the snap cap.

Print Settings

• Material: PLA+, ABS, or PETG. O-ring print with TPU is also primer (but it's not mandatory).

• Infill: 15-20% for the case; 100% (Solid) for the tool handle, or increase wall settings to 4.

• Layer Height: 0.12mm is recommended. The lower layer height ensures the screw threads are smooth and easy to open.

• Supports: None required. Print both parts of the case with the openings facing up.

⚠ Safety Warning

• Stay Organized: Print the case in a bright, high-visibility color to ensure it is never confused with live ammunition storage.

• Clear Your Firearm: Always double-check that your firearm is unloaded and no live ammunition is present before beginning dry fire drills.

☕ Support My Work

If this organizer helps keep your training gear tidy, consider buying me a coffee!

https://ko-fi.com

Thank you so much for the coffee! I truly appreciate your wonderful support. Happy printing!